If you have to replace parts in a Moen faucet in your bathroom or kitchen, you’ll likely need one Allen wrench to remove details parts. Keep analysis for a fast guide on what type of Allen wrench you’ll require for your project. Nevertheless of why you need to take apart a faucet in your home, we are right here to assist you figure it out.

You are watching: Moen kitchen faucet allen wrench size

Which dimension Allen Wrench will I Need?

For the most part, Moen uses hardware that will require a 7/64 customs hex wrench. This uses to Moen Renzo faucets, handle collection screws ~ above one-handle kitchen faucets, and PosiTemp levers in Moen showers.

Are The Hex Wrench and The Allen Wrench The same Thing?

The terms ‘hex wrench’ and ‘Allen wrench’ might be provided interchangeably. An Allen key or Allen wrench is additionally known as a hex key. The is a little tool that can be used to drive bolts and screws v a hexagonal socket. These devices are easily accessible in a variety of sizes to fit a lot of different needs.

When it involves repairing a faucet, you’ll need an as necessary sized hex wrench to do the trick. Every one of the sizes have the very same hexagonal-shaped tip. Even if it is you need to examine the cartridge in the valve human body or examine the inner of the faucet for rust, you require to choose the suitable size that wrench because that removal.

How perform You get A Stripped Allen Bolt the end Of A Moen Faucet Handle?

Perhaps friend are all set to start your repair on her faucet. Probably it is leaking water or making a strange whistling noise, or the manage will no turn. You have done her research and are ready to get going ~ above the problem and also move toward a solution. However, you go to remove the set-screw, which is just one of the initial actions in many processes, and it is stripped. Currently what?

Before you acquire too stunner with fancy equipment, shot a few simple tip to remove the stripped bolt. You deserve to use pliers to try and tight the head that the screw to rotate it counterclockwise. If you use this method, be sure to turn progressively to loosen wherein it is caught.

*

If that didn’t work, shot using a rubber band. Ar the rubber tape over the stripped bolt. Usage a flathead screwdriver and drive it right into the rubber band. The rubber band will assist fill the gaps and help remove the screw. If the screw is totally stripped or the fastener is too big, this an approach usually will not cut it.

You additionally can shot using a flathead screwdriver after turning the screw right into a flathead. Perform this by creating a groove in the head with a Dremel or file. Once you have obtained a hard notch made, usage a flathead screwdriver to eliminate it. However, it is important to note that this technique will damage the head that the screw, so carry out not use this method if you space trying to steer clean of that.

If nobody of these methods have actually worked, try using this method. As frustrating as it is, remove a stripped set screw is doable with the right equipment.

For this, you’ll need:

Power drillHammerAdjustable pliers the lockScrew extractorsMetal drill bit

Remove The Stripped Allen Bolt

Start by gathering all of your tools. You must ensure the you acquire the suitable size of screw extractor, together you will require to affix the head to the screw. Affix the correct steel drill bit to your strength drill. Organize the drill little bit on the stripped screw head, best centered, for ideal results.

Drill a pit right into the screw the is around 6.5 millimeters. Switch your drill to reverse to eliminate the screw. It is critical that you choose the correct size of bit to drill the hole, or the extractor will certainly not work.

Place the screw extractor right into the feet in the screw. Use the hammer to journey the extractor in further. Make certain the extractor fits snugly in the screw hole, or you will not be able to remove the stripped screw.

Now that you’ve got the extractor firmly set into the screw hole, use your adjustable wrench or locking pliers to maneuver the screw extractor warm in a counterclockwise motion. The stripped screw will begin to turn out the the faucet once you start to rotate it.

See more: How To Press The Gas Pedal Gently, How To Drive Stick


*

Once you acquire the stripped bolt out, girlfriend can continue with any type of necessary repairs. Psychic to gain a instead of screw for this reason you don’t run into this worry again when trying to eliminate the faucet handle screw or shower handle screw.