There are many varieties of loosened materials that are sold in cubic yards, or “yards,” because that short. Topsoil, mulch, and also gravel are just a few of the frequently used products that are sold by this volume metric.

You are watching: How many tons does a tandem dump truck hold


It isn’t just landscapers and contractors who need to have actually knowledge that cubic yards. If you’re going to transport any of the products mentioned over in a intake truck, because that example, it’s essential to know precisely how lot the truck can carry. In the adhering to guide, we’ll comment on how you determine a dump truck’s volume in cubic yards.

Dump van Cubic Yardage - The Basics

While over there is room for variance, most full-size dump trucks have actually a capacity of between 10 and also 16 cubic yards. These types of vehicles regularly have your capacity detailed in the owner’s manual.

Smaller intake trucks, frequently those placed on a pickup frame, will have actually comparably less capacity, occasionally as little as 1 ½ cubic yards.

If you can’t uncover your dump truck’s volume in the owner’s manual, don’t worry. It’s relatively simple to determine using a ice measure and a calculator.

Measure the width the the truck bed, indigenous the inside of one wall surface to the other. Write down this number in feet to make the calculations simpler. Therefore let’s say your truck bed is 63 customs wide, you would write it under as 5.25 feet.Measure the length the the bed in the very same fashion and record the number in feet.Measure the height the the bed, beginning from the bottom and also extending come the top of the tailgate or the political parties (whichever is lower).At this point, you should have actually three figures provided for the width, length, and height of your bed. Multiply them all together to recognize the capacity. For a truck bed that’s 14 feet long, 6 feet wide, and also 5 feet high, you would certainly calculate 14 x 6 x 5 = 420. This number is the capacity of your truck bed in cubic feet.There are 27 cubic feet in a cubic yard, therefore to discover your cubic yardage, you need to divide the vault number by 27. Utilizing the example above for our 420 cubic foot truck, we would certainly calculate 420 ÷ 27 = 15.56 cubic yards.

Dump Truck capacity - more Than just Yardage

A cubic yard represents a block of material that steps three feet on every side. In theory, the product itself have the right to be anything, indigenous water to rock to mulch. Because that this reason, yardage alone is one imperfect measurement of a recording truck’s in its entirety capacity. Perhaps more important is the truck’s weight rating.

The weight rating will depend on a range of factors, including the truck’s chassis and suspension. Smaller dump trucks on pickup frames deserve to have a load limit together low as fifty percent a ton, whereas larger dump van can lug as lot as 15 tons (30,000 pounds) the material. That’s rather the large range!

When hauling many materials, the load of your fill will it is in the limiting factor. Because that example, sand have the right to weigh upwards the 3,000 pounds per cubic yard, definition that in a massive, 30,000-pound intake truck, friend could carry a maximum of 10 cubic yards. In a dump truck on a half-ton pickup frame, you could only bring a 3rd of a yard of sand.

Mulch, in particular, have the right to be an overwhelming to account for, largely due to the fact that it relies on just how wet it is. Dried mulch can weigh as tiny as 700 pounds every yard, conversely, wet, compost-like mulch deserve to tip the scales at 1,500 pounds per yard.

See more: 2001 Ford Focus Cranks But Wont Start !: Fordfocus, 2001 Ford Focus Fr200 Cranks But Wont Start


Larger recording trucks have the right to carry approximately 10 to 16 cubic yards the material. However, the full volume is not generally the limiting factor. In most cases, the vehicle’s load limit will certainly determine how much material you are eventually able to safely transport.