The 1997-2006 Ford exploration models come equipped with a quick-connect fuel filter. The key responsibility that the fuel filter is to store any kind of fuel impurities from entering into the fuel injectors so only clean fuel renders it come the injectors and also the engine. Change the fuel filter between 60,000 and 75,000 miles. You have the right to purchase the quick-disconnect tool that you will need for this project at most auto-parts stores.

You are watching: 2011 ford expedition fuel filter location

Park the Ford exploration in a well-ventilated location that has a level surface. Interact the parking brake to keep the vehicle from rolling.

Slowly eliminate the gas lid from the filler tube on the gas tank. This process will depressurize the fuel system and also prevent fuel native spraying when the fuel currently are removed from the fuel filter.

Slide under the driver side of the Expedition and locate the fuel filter, i beg your pardon is placed to the structure rail directly in front of the gas tank. The fuel filter is a cylinder-shaped component with a quick-connect fuel line coming the end of each end. Slide the drip pan under the fuel filter.

Insert the finish of the quick-disconnect tool into the finish of among the fuel lines. Then, press the device inward right into the fuel line. This will release the fuel line from the fuel filter port. Pull out on the fuel heat at the exact same time that the tool is gift pressed inward. Traction the fuel line right off the fuel filter port. Move the device to the other fuel line and also repeat the process.

Loosen the clamp from roughly the fuel filter v a flat-head screwdriver. Keep in mind the direction that the arrowhead on the next of the fuel filter. The new fuel filter will have to be positioned v the arrow pointing in the same direction. Then, pull the fuel filter the end of the bracket and also place it into the drip pan.

Position the new fuel filter right into the clamp v the arrow pointing in the ideal direction. Tighten the clamp over the fuel filter with the screwdriver. Then, push both fuel lines straight onto the fuel filter ports until each heat locks in place. When the currently are propelled far enough onto the ports, the plastic clips will lock inside of the fuel lines. Then, slowly pull exterior on the fuel lines to ensure the each fuel line is secured come the fuel filter ports.

Slide the drip pan out from under the Expedition and also screw the gas cap back onto the filler tube till it clicks.

Turn the ignition to the accessory place for around five seconds and then turn it earlier to the off position. Repeat this a complete of 3 times before cranking the engine.

Crank the engine and inspect the brand-new fuel filter for indicators of gas leaking roughly the fuel lines. Permit the engine to run for around 30 seconds. Then, rotate the engine off.


The arrow that is imprinted top top the side of the fuel filter to represent the directgion of fuel circulation through the filter. The arrowhead must allude toward the fuel line that is travel to the engine.

See more: Which Of The Following Groups Does The President Most Rely Upon For Advice?


No smoking cigarettes or open up flames roughly any type of fuel. Wear safety glasses or goggles once replacing the fuel filter. Describe state and local legislations that pertain come the discarding of offered fuel and used fuel filters. Never ever dispose the fuel onto the ground.